|
Go Kart Brake & Throttle Control Package, Only $19.99
Included in this brake & throttle control
package:
(1) Throttle Pedal
(1) Brake Pedal
(1) Throttle Rod - 1/4" x 30", 1/4-28 thread and hole on one end
(1) Brake Rod - 1/4" x 40-1/2", 1/4-28 thread on one end
(1) Throttle Cable - 1/16" x 54" Cable, 50" Conduit
(1) Nylon Cable Guide
(1) Wire Stop
(1) Spring - 1/4" x 1-7/8"
(2) Tinnerman Nuts
(1) Hex Nut - 1/4-28
(1) Forged Clevis - 1/4-28 Thread
(1) Clevis Pin w/hole
(1) Cotter Pin - 1/16" x 1/2"
(2) Control Rod Anchors
This complete package is great for replacing your worn out original controls or
if you're building a go kart from scratch. Costs only $19.99! If you bought the
components separately, you'd pay almost $10 more!
 Brake
Control Rod Kit
Complete brake control rod kit. 1/4" x 40-1/2", 1/4-28
thread. Includes forged 1/4-28 clevis, clevis pin with hole, cotter pin
and tinnerman nut.
|
| Complete Kit |
Part # 2281 |
Price $7.10 |
|
| Kit less rod |
Part # 2279 |
Price $4.15 |
|
| Kit Components |
Part # |
Price |
Buy Now |
| Brake Rod, 1/4" x 40-1/2",
1/4-28 Thread |
8218 |
$3.50 |
|
| Clevis Pin, Forged 1/4-28 |
8354 |
$3.25 |
|
| Clevis Pin, w/Hole |
8355 |
$0.18 |
|
| Cotter Pin, 1/16" x 1/2" |
8419 |
$0.03 |
|
| Tinnerman Nut |
8505 |
$0.23 |
|
|
Throttle
Control Rod Kit
Complete brake control rod kit.
1/4" x 30", 1/4-28 thread with hole. Includes wire stop,
1/4" x 1-7/8" spring, 50" x 54" throttle cable
assembly, 1/4-28 hex nut, tinnerman nut and nylon cable guide. |
| Complete Kit |
Part # 2280 |
Price $8.95 |
|
| Kit less rod |
Part # 2278 |
Price $4.75 |
|
| Kit Components |
Part # |
Price |
Buy Now |
| Throttle Rod, 1/4"
x 30", 1/4-28 Thread w/Hole |
8216 |
$3.75 |
|
| Wire Stop |
2360 |
$0.60 |
|
| Spring, 1/4" x
1-7/8" |
2383 |
$0.30 |
|
| Throttle Cable,
1/16" x 50" Cable; 54" Conduit |
1751 |
$2.30 |
|
| Hex Nut, 1/4-28 |
8500 |
$0.03 |
|
| Tinnerman Nut |
8505 |
$0.23 |
|
| Nylon Cable Guide |
2381 |
$0.60 |
|
 Control
Rod Anchors
Uniformly stamped from 1/8" steel. Easily welded anywhere on
a vehicle frame where a guide or support is needed. 1/4" hole
for rods or other fittings. Very economical. |
| Description |
Part # |
Price |
Buy Now |
| Control Rod Anchor |
8182 |
$0.30 |
|
 Foot
Pedals
Zinc plated with built in stop. Four position rod mounting.
Mounting bolt, 5/16-18 x 1-3/4". |
| Description |
Part # |
Price |
Buy Now |
| Brake Pedal |
1806 |
$5.25 |
|
| Throttle Pedal |
1811 |
$5.25 |
|
|
