|
|
Go Kart Frame w/Steering
Hoop
This sturdy, double tube construction,
high quality unit is jig-welded and made of 1" x .083" wall
tubing. Complete with steering hoop assembly, belly pan, engine mounting
plate, spindle brackets, steering shaft bushing, pedal bushings,
live-axle bearing hangers and control rod anchors. No additional welding
needed. Well designed and rugged. Dimensions are:
Frame Wheelbase: 41" from the front spindle bracket to the rear
axle opening
Frame Width: 21 3/4" across the back of the frame
Frame Overall length: 48" from the front of the frame to the
back of the frame
Frame Height: 5-5/8" from the top of the frame in the back to the
bottom of the frame
Front Axle Width: 26" from the end of the spindle bracket across
the frame to the end of the other spindle bracket
|
| Kart Frame w/Steering Hoop |
3502 |
$129.00 |
|
| Steering Hoop Only |
3505 |
$25.50 |
|
|
Mini-Bike Frame & Fork
Kit
Jig welded from high quality 7/8"
OD by .083 wall tubing, it is designed to accommodate up to and
including 17.5" OD mounted wheels. Complete with engine mounting
plate, front axle holes and rear mounting tabs. No additional welding is
required. Maximum engine height of 13-1/2". Wheelbase -
36". Handlebar Width - 21". The steel tubing making up
our minibike fork is now bent forward at a 30 degree angle for improved
steering radius and handling for both kids and adults.
 |
| Description |
Part # |
Price |
Buy Now |
| Minibike Frame & Fork Kit |
3545 |
$99.00 |
|
| Minibike Frame Only |
3548 |
$72.25 |
|
| Minibike Fork & Bolt Set |
3546 |
$27.50 |
|
|
Minibike Kickstand
This kickstand can be used with the minibike frame
shown above. It comes with a weld on bracket and kickstand
w/spring. Approximately five inches tall.
 |
| Description |
Part # |
Price |
Buy Now |
| Kickstand Kit, complete with Bracket |
1727 |
$4.35 |
|
| Kickstand with Spring, no bracket |
1729 |
$2.90 |
|
| Weld on Bracket for Kickstand |
1728 |
$1.55 |
|
|
Fenders
Deep drawn steel fender made from cold rolled steel.
 |
| Description |
Height |
Length |
Max Width |
Part # |
Price |
Buy Now |
| Fender, Chromed |
3.75" |
14.5" |
4.2" |
1857 |
$11.70 |
|
| Fender, Unplated |
3.75" |
14.5" |
4.2" |
1855 |
$5.95 |
|
| Fender, Chromed |
4.75" |
18.0" |
5.5" |
1866 |
$15.00 |
|
| Fender, Unplated |
4.75" |
18.0" |
5.5" |
1865 |
$6.95 |
|
| Fender, Chromed |
4" |
18" |
4" |
1830 |
$13.00 |
|
| Fender, Unplated |
4" |
18" |
4" |
1829 |
$5.95 |
|
 Engine
Mounting Plates
Made of heavy gauge steel, with slotted mounting holes. |
| Description |
Part # |
Price |
Buy Now |
| 8-3/4" x 7-3/4" w/Lips |
8191 |
$9.25 |
|
| 5" x 12" Flat |
8190 |
$7.25 |
|
|
Frame Weldments
Universal applications for mounting
spindles, jackshafts, live axles, throttle & brake controls, pitman
arms and more. Weld in place. Priced and sold in pairs.
 |
| Description |
Part # |
Price |
Buy Now |
| Two 1"
live axle bearing hangers for 2 or 3 hole flangettes |
8127-2 |
$6.00 |
|
| Two king pin
brackets, 5/8" bore for mounting spindles |
8171-2 |
$5.00 |
|
| Two king pin
brackets, 1/2" bore for mounting spindles |
8181-2 |
$5.00 |
|
| Two
hardened
steel King pins, 5/8-18 x 3.75" for bracket |
8445-2 |
$2.70 |
|
| Two
jackshaft
bearing hangers, 1-3/8" ID |
8128-2 |
$4.00 |
|
| Two
Pitman
arms for 5/8" shaft, 5/16" bolt hole, 1-5/8" centers |
8129-2 |
$2.10 |
|
| Two rod
anchors for 1/4" brake and throttle rods, 1 3/8 x 3/4" |
8182-2 |
$0.60 |
|
 Rubber
Grommet Kit
To shock mount engines. Also for fairing mounting. |
| Description |
Part # |
Price |
Buy Now |
| Rubber Grommet Kit |
1883 |
$3.30 |
|
|
Folding Foot Pegs, Pair
Sturdy rubber tread folding foot pegs.
With long mounting studs. Folds when not in use. Uses 10mm bolts.
Mount using 2 #8162 clamps.
 |
| Description |
Part # |
Price |
Buy Now |
| Folding Foot Pegs, Pair |
1739 |
$6.50 |
|
| Folding Foot Pegs, Pair, w/Clamps |
2239 |
$10.50 |
|
| Non-Slip Clamps, Set, 4 Halves |
2209 |
$4.25 |
|
|
